www.IndustrialSafety.com

Checkers Guard Dog Heavy Duty 5 Channel Cable Protectors with Dog-Bone Connectors

2012-02-29T15:45:00.001-08:00

Ideal for public, commercial, and industrial areas.

The fast and easy way to guard and protect valuable electrical cables and hose lines from damage and abuse while providing a method of safe crossing for constant vehicle and pedestrian traffic. Each cable/hose line is separated and organized in its own protective channel to ensure safety. Ideal for use in amusement parks, entertainment venues, sporting events, and in most public, commercial, industrial, construction, and utility applications. Optional Anti-Slip Rubber Pad Kit available for added traction on smooth surfaces.

Protects cables and lines with an outside diameter up to 1.3 inches.

End caps, 45° right & left turns, and 4-way cross available.

Anti-slip rubber pad kit available as an accessory.

NEW FEATURES

Four through-holes with an inside diameter of .21” for use with either nails or screws (not included) for temporary mounting of cable protector:*

Washer with a minimum outside diameter of .75” should be used with each nail or screw.

Through-holes use a threaded insert, but the threaded insert is not designed for the use with a bolt.

New 2.25 in. x 1.25 in. smooth area added for adhering a barcode label or RFID tag. (Surface should be cleaned with a mild detergent or solvent before applying an adhesive label)

Pry slots added under each through-hole to simplify removal when fastened down.

* due to variables associated with mounting, we highly recommend testing the hardware for each application.

FEATURES

LOAD CAPACITY: 10,500 lbs/tire (21,000 lbs/axle)

Protects cables and hose lines up to 1.3 in. in diameter.

All weather polyurethane construction with heavy load capacity.

Hinged lid makes placing and removing cables and hose lines easy.

Patented 5-bar tread surface provides maximum traction.

Heavy duty Dog-Bone connector interlocks modular sections.

Lightweight and easy to transport, setup, disassemble and store.

Carrying handle is conveniently recessed on underside of protector.

Safety warning symbols molded into lid surface.

NEW - Through holes added for fastening protector down.

NEW - Smooth area added for adhering a barcode label or RFID tag.

NEW - Pry slots added underneath for easy removal when

fastened down.

End caps provide gradual taper to ground or floor.

4-Way Cross allows you to split or join cable runs.

45° left and right hand turns allow for additional configuration options.

Join left and right turns to create a jog (see illustration below).

Increase traction on smooth surfaces with optional anti-slip rubber pads.

NEC REQUIREMENTS

Protects valuable electrical cables and permits compliance with 2008 National Electrical Code requirements (Article 525) for minimizing the tripping hazard of electrical cables and cords at carnivals, fairs, amusement parks and similar events.

ADA COMPLIANT ACCESSORIES

Meets Americans with Disabilities Act guidelines for ADA accessibility.

See and purchase these online at - http://www.industrialsafety.com/checkers-5-Channel-Cable-Protectors-Dog-Bone-Connectors-s/1723.htm

MODEL	DESCRIPTION	A	B	C	D	E	WEIGHT
	& COLOR	LENGTH	WIDTH	HEIGHT	CHANNEL	CHANNEL
					WIDTH	HEIGHT
GD5X125-O/B	5 Channel Protector	36 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.	21 lbs.
	Orange Lid	(914.4 mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(9 kg)
	Black Ramp
GD5X125-B/B	5 Channel Protector	36 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.	21 lbs.
	Black Lid	(914.4 mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(9 kg)
	Black Ramp
GDEC5X125-O	5 Channel End Caps	8.75 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.	12 lbs
(Pair Only)	(Female) Orange	(223.2mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(5.6 kg)
	(Male) Orange	5.25 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.
		(133.92 mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)
GDT5X125-R-O/B	5 Channel	24.5 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.	11 lbs.
	45° Right Turn	(622.3 mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(5.0 kg)
	Orange Lid
	Black Ramp
GDT5X125-L-O/B	5 Channel	24.5 in.	19.75 in.	1.87 in.	1.33 in.	1.32 in.	11 lbs.
	45° Left Turn	(622.3 mm)	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(5.0 kg)
	Orange Lid
	Black Ramp
GDCR5X125-O/B	5 Channel	A=28.5 in	19.75 in.	1.87 in.	1.33 in.	1.32 in.	23.1 lbs.
	4-way Cross	A2=24.5 in.	(501.7 mm)	(47.6 mm)	(34.0 mm)	(33.65 mm)	(10.5 kg)
	Orange Lid
	Black Ramp
CPRPKIT1-10	Optional Anti-Slip Rubber Pad Kit (includes 10 rubber pads)	n/a	n/a	n/a	n/a	n/a	.15 lbs.
	for GD5X125						(.07 kg)
CPGLUE	1/2 oz Bottle of Checkers' Clear Super Glue	n/a	n/a	n/a	n/a	n/a	.07 lbs.
	(best if kept refrigerated)						(.032 kg)
	Use for Permanent Application of Anti-Slip Rubber Pads

IndustrialSafety.com - About Us

2012-02-25T08:22:00.001-08:00

IndustrialSafety.com is a leading provider of integrated supply, procurement and logistics solutions to Government entities and businesses. IndustrialSafety.com is a full service Government Contractor and a preferred fulfillment partner to Fortune 500 Clients. Whether you are purchasing emergency supplies for a natural disaster or constructing a new Military Facility, IndustrialSafety.com has all the supplies you need to effectively complete the job. IndustrialSafety.com has relationships with over 2500 manufacturers and suppliers stocking over 1,000,000 items.

Our Core Material Categories:
Industrial and MRO Products
Personal Protective Equipment
Food Service Equipment and Supplies
Janitorial and Hospitality Supplies
Emergency Preparedness Supplies
Material Handling Equipment

We are Your Best Value Solution for:
Strategic sourcing
Worldwide logistics solutions
Supply chain enhancement
Global reach
Streamlining procurement
Shortening the logistics pipeline

Our Mission:
To provide a one stop shop for customers, filled with every product they need at the right price.

Our Vision:
One stop shopping, every product you need, the best price and timely delivery.

Our Values:
To provide the highest level of customer service.

Visit us at: www.industrialsafety.com

Using the Zefon Z-Lite-IAQ Pump

2012-02-11T14:25:00.000-08:00

Zefon Bio-Pump Plus with TSI Calibrator Kit ZBP-200-CKIT

2012-02-09T15:25:00.000-08:00

The Zefon Bio-Pump® Plus with TSI 4046 Calibrator Kit features all of the advanced benefits of the Bio-Pump Plus with the high accuracy of a NIST traceable primary calibration device from TSI.

Features:

'Quick Sample' feature makes sampling a breeze.

Programmable pump timer allows unattended operation.

Both the Bio-Pump Plus and TSI calibrator are battery powered.

Very quiet operation

TSI calibrator provides continuous real-time volumetric flow rate readings, so pump adjustment and calibration is fast and easy

Field portable NIST traceable calibration—use the same primary calibrator for adjustment, calibration and periodic flow checks

Compatible with Air-O-Cell®, Air-O-Cell® CSI and Via-Cell® cassettes.

Each Kit comes complete with:

Bio-Pump Plus Sampling Pump

TSI 4046 Primary Calibrator

Quick battery charger for Bio-Pump Plus

A set of 6 AA alkaline batteries for the TSI Calibrator

Attachment hoses to connect the TSI calibrator to the Bio-Pump Plus

10 FREE Air-O-Cell® cassettes

Hard-sided carrying case

Bio-Pump Plus Specifications:

Flow Rate: 15 LPM

Housing: ABS

Housing Color: Black

Battery: Nickel Metal Hydride

Sampler Size: 4.375" width; 8" depth; 2.75" height

Weight: 1.6lbs

TSI 4046 Calibrator Specifications:

Flow Range: 2.5-300 LPM

Accuracy: ±2% or 0.05 std. lpm, whichever is greater

Dimensions: 7.2 in. × 2.5 in. × 2.1 in.

Power: 6 AA alkaline batteries

Weight: 3lbs

Warm-up Time: 1 Minute

Additional Information Available

1. Bio-Pump Plus User Manual

2. TSI Primary Calibrator User Manual

See more information online at - http://www.industrialsafety.com/Zefon-ZBP-200-CKIT-p/zefon-zbp-200-ckit.htm

Equipto Mobile Aisle Systems

2012-02-08T11:07:00.000-08:00

Design Benefits & Features

Modular design facilitates easy assembly, allowing future reconfiguration and expansion.

Mobile carriages are rated to carry a maximum of 1000 lbs. per linear foot.

Mechanical-assist controls enable operator to move 10,000 lbs. with minimal effort.

All-track drive ensures uniform movement of carriages.

Modular platform provides for re-leveling rails after installation.

Accommodates all versatile V-Grip shelving and rack components.

Space Utilization Advantages

Avoid the cost of new construction by doubling storage capacity in the same footprint.

Free valuable floor space for other operations without sacrificing storage capacity.

Integration with V-Grip maximizes flexibility to store small and bulk items together.

Market Applications

Manufacturing - maintenance, parts, supplies, R&D, tool room.

Automotive - archival records, parts departments.

Healthcare - pharmacy, maintenance, supplies, radiology.

Education - athletic equipment, maintenance, supplies.

Military - parts/supplies, maintenance, vehicle service, flight maintenance, weapon racks.

Law enforcement - property and evidence, supplies, uniforms.

Retail - backroom storage, supplies.

Museum - artifact storage and security.

Photos of Installations

Mobile Aisle System - Tire Storage

Mobile Aisle System - General Storage

Mobile Aisle System with Modular Drawers

Mobile Aisle System with V-Grip Shelving

Mobile Aisle System with V-Grip Shelving - File Storage

See more information online at -

http://www.industrialsafety.com/Equipto-Mobile-Aisle-Systems-s/1690.htm

Traffic Logix SafePace 100 Radar Sign

2012-01-30T07:31:00.000-08:00

The SafePace™ 100 Radar Sign is a low-cost, portable radar speed sign ideal for homeowners associations, gated communities, private roads, shopping malls, school zones, corporate campuses, construction zones, or residential roads. The compact, lightweight sign displays the speed of approaching vehicles and flashes a high intensity strobe to warn drivers who exceed the threshold speed, programmed by the user. Available with yellow or white “Your Speed” sign plate, the sign also offers a full complement of options for power alternatives and improved portability. The sign can be mounted in minutes for quick and easy set-up.

See it online - http://www.industrialsafety.com/SafePace-100-Traffic-Radar-Speed-Signs-s/1524.htm

IndustrialSafety.com 2012

2012-01-21T09:25:00.001-08:00

We want to thank all of our customers for their business this past year. This past year we were able to grow our customer and product base. We will continue to increase the number of products available to you as well as increase the amount of information found on our site. As we grow please continue to share your feedback with us.

This coming year we are going to focus on the growth of our new product lines. Please feel free to contact us if you don't see something you need on our site. Also contact us if you need a price quote. We are always open to working out a more competitive price.

Thanks again for working with us this past year we look forward to serving you for years to come!

Www.industrialsafety.com

North Safety 913200 FRONTIER SCBA LOW PRESS MIN W/ALUMINUM CYLINDER Free Shipping

2012-01-19T07:13:00.000-08:00

North Safety Frontier Series basic Self-Contained Breathing Apparatus includes facepiece, cylinder and nylon harness. This ecconomical model is made to fit your budget ideal for occasional SCBA usage, and to help you stay in compliance with OSHA requirements for confined space.

This worker friendly SCBA has all the features you need to get the job done. Easy to train and easy to use, the North Frontier is specifically designed for industrial environments.

OSHA Assigned Protection Factor APF of 10,000

Frontier Series SCBA

Frontier Series SCBA includes a nylon harness assembly and features a low-profile compact demand valve positioned on the side of the facepiece. Frontier Series SCBA allows for fast donning in emergencies. PVC construction is ideal for chemical resistance, and allows protective eyewear to be worn. Includes a nylon harness and a compact side-mounted demand valve.

NIOSH approved

Facepiece meets ANSI Z87.1-2003

Hazardous Material

California Proposition 65 Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

SCBA Respirator With Facepiece, Low Pressure, Size Medium/Large, Duration 30 Minutes, 2216 PSI, Cylinder Construction Aluminum, Material Nylon Harness, Replacement Cylinders 910301LP

See it here - http://www.industrialsafety.com/North-Safety-913200-safety-industrial-supplies-p/34768491.htm

Bouton Lavoptik™ Eyewash Wall Unit

2012-01-13T07:05:00.000-08:00

Engineered to provide emergency eye irrigation with a maximum flow for15 minutes at a rate of 0.4 gpm. Includes steel wall brackets for easy mounting, drainage hose, bacteriostatic additive and test log card. Flow is activated in less than 1 second. Meets all applicable ANSI standards.

See it online - http://www.industrialsafety.com/Bouton-90320-safety-industrial-supplies-p/325101021.htm

Justrite EcoPolyBlend Spill Control Pallets

2012-01-11T15:52:00.000-08:00

The first and only spill control line made of recycled polyethylene!

Eco-friendly pallets are made of up to 100% recycled polyethylene, making them twice as good for the environment! They not only protect against groundwater contamination, they also utilize post-industrial material that might have otherwise been discarded into the waste stream.

Quality engineered with a robust design, pallets withstand the toughest environments for superior spill control. Durable, UV-protected EcoPolyBlend™ polyethylene is nearly impervious to chemical attack from hazardous acids, caustics and solvents. Seamless construction eliminates leaks even if a 55-gallon (200L) drum fails and completely empties its contents.

Fully compliant, Justrite® EcoPolyBlend™ Pallets feature oversized leakproof sumps that meet or exceed regulations. Sturdy, removable grates are nearly 2-1/2" (64mm) thick for superior crack resistance. Self-locating, they reduce the chance of grate "ride-up" and remove for quick sump inspection and cleaning.

Two drum and 4-drum square pallets include wide forklift pockets for easy relocation. Square pallet may be equipped with an optional Ramp to facilitate loading and unloading of heavy drums.

Meets or Exceeds
EPA 40 CFR 264.175
NFPA 1 the Uniform Fire Code 60.3.2.10
International Fire Code 2704.2.3
Spill Prevention, Control and Countermeasures (SPCC) Compliant
NFPA 30 9.13.1 and OSHA 29 CFR 1910.106(e)(2)(iii)

Black = 100% recycled content
Yellow = 35% recycled content"Eco black" pallets are made of 100% recycled material. Their dark color camouflages dirt and keeps workplaces looking clean.
Yellow pallets are available for high visibility or liquid segregation when desired; material content consists of virgin poly sumps with 100% recycled grates... resulting in a total of 35% recycled content.
Yellow Ramp non-recycled.

http://www.industrialsafety.com/Justrite-EcoPolyBlend-Spill-Control-Pallets-s/1630.htm

Checkers RC815 Rubber Wheel Chock With Bottom Void

2012-01-10T16:58:00.001-08:00

815 Series Rubber Wheel Chocks

For "over the road" trucks and trailers and loading dock facilities.

Roadblocks 815 Series Rubber Wheel Chocks are ideal for keeping trucks and trailers in place during loading and unloading operations. They are strong, safe and resistant to damage from UV, moisture, salt and oils. Their traction design grips tire and road and will not cause tire or pavement damage. Chock design also allows either side to be positioned against tire.

FEATURES

Durable rubber construction.

Made from recycled materials.

Resistant to damage from UV, moisture, salt and oils.

Ribbed pyramid design.

Eye bolt for ropes or chains.

Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.

Select wheel chocks appropriate to type and size of vehicle.

Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.

Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.

Always use wheel chocks in pairs and on firm surfaces.

More than one pair may be required.

Chock in direction of grade.

Chock wheels on both sides of vehicle in direction of grade.

Test chocks to ensure they meet requirements.

Chocks are effective holding devices when properly sized and positioned.

Always remove wheel chocks before attempting to move vehicle.

Do not drive over wheel chocks.

Improper use can result in product failure.

Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

OSHA SPECIFIES

1910.178 (k)…

(1) The brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.

1910.178(m)…

(7) Brakes shall be set and wheel blocks shall be in place to prevent movement of trucks, trailer, or railroad cars while loading or unloading. Fixed jacks may be necessary to support a semitrailer during loading or unloading when the trailer is not coupled to a tractor.

1910.111(f)…

(9) Chock blocks. At least two chock blocks shall be provided. These blocks shall be placed to prevent rolling of the vehicle whenever it is parked during loading and unloading operations.

Available for purchase here - http://www.industrialsafety.com/Checkers-RC815-p/checkers%20rc815.htm

Coleman / Stearns 1248 Inflatable chest pak - 33-Gram Inflatable Chest Paks

2012-01-10T11:45:00.000-08:00

Coleman / Stearns 1248 Inflatable chest pak - 33-Gram Inflatable Chest Paks

Made of durable nylon shell with fleece-lined collar to wick away moisture. Offers quick and reliable manual CO2 inflation by pulling lanyard or by oral tube. Cylinder seal indication allows user to see at a glance if inflatable is ready for use. Provides 33.7 pounds of buoyancy when inflated by the CO2 cylinder. Navy. USCG Type lll Approved.

Features:

- Front buckle and D-ring

- Multiple pockets

Pyramex Custom Logo'd Hard Hats in Action With the Houston Dynamos!

2012-01-09T08:07:00.001-08:00

Pyramex Custom Logo'd Hard Hats in Action With the Houston Dynamos!

IndustrialSafety.com recently supplied the Houston Dynamos with custom logo'd hard hats for a recent walk through at the Dynamo's brand new stadium that is currently being constructed.

"BBVA Compass Stadium will be a state-of-the-art, open-air stadium designed to host Dynamo matches as well as additional sporting and concert events. When it opens in 2012, the 22,000-seat stadium will be the first soccer-specific stadium in Major League Soccer located in a city's downtown district.

Spectators will be able to experience unobstructed views from both the lower and upper seating bowls, which are supported by a single concourse. The concourse provides full access around the stadium with easy access to concession and toilet facilities. The fan experience will be enhanced by modern sound and video elements throughout the stadium. Fully integrated broadcast facilities will allow viewers and listeners to feel part of the atmosphere."

For custom logo hard hats, safety vests or any other product, please feel free to contact: quotes@industrialsafety.com.

New Safety Products to the Market for 2012

2012-01-09T08:05:00.001-08:00

3M-

8210V- New valved disposable respirator. http://solutions.3m.com/wps/portal/3M/en_US/PPESafetySolutions/PPESafety/Personal_Protective_Equipment/Product_Catalog/~/3M-Particulate-Respirator-8210V-N95-Respiratory-Protection-80-each/case?N=4294668350+5011378&Nr=AND%28hrcy_id%3A8Q2TRJPZ3Dgs_CGKH13BWN9_N2RL3FHWVK_GPD0K8BC31gv%29&rt=d&x=10&y=8

Versa-Flow Respirator- New Power Air Purifying Respirator (PAPR)- http://solutions.3m.com/wps/portal/3M/en_US/OHESD-Survey/Versaflo/?WT.mc_id=www.3m.com/Versaflo

H-700 Series Hard Hat with Uvicator™ Sensor- newest addition to the H-700 series hard hat family. This award-winning, lightweight hard hat offers the extended comfort and protection, and also features a sensor that changes color as the hard hat is exposed to UV light. H-700 Series Hard Hat is available with a 4-point ratchet or pinlock suspension and an optional 6-point strap.

http://solutions.3m.com/wps/portal/3M/en_US/OHESD-Survey/H-700/?WT.mc_id=www.3m.com/H-700

MSA-

VGard Accessory System- http://www.msanorthamerica.com/catalog/catalog505431.html?utm_source=MSANA&utm_medium=ProductSpotlightImage&utm_campaign=VGardSystem

ALTAIR® 5X Multigas Detector with MSA XCell® Sensor Technology- The ALTAIR 5X Detector allows for an industry-first LEL, O2, CO, H2S, and SO2 60-second span calibration and 10-second bump test time. The ALTAIR 5X Detector is equipped with an internal integral pump. 4-year expected sensor life on LEL, O2, CO, H2S, SO2, IR,and standard 3-year instrument warranty. 3-year expected sensor life on NH3, Cl2, and standard 2-year warranty.

http://www.msanorthamerica.com/catalog/product505319.html

Honeywell-

Sperian/North/Howard Light/Miller

UVEX VersaPro safety eyewear- http://www.honeywellsafety.com/Products/Uvex/Eye_and_Face_Protection/Uvex_VersaPro.aspx?site=/americas

UVEX ExtremePro safety eyewear- http://www.honeywellsafety.com/Products/Uvex/Eye_and_Face_Protection/Uvex_ExtremePro.aspx?site=/americas

Miller Turbo T-BAK™ Personal Fall Limiter- http://www.honeywellsafety.com/Products/Miller_Fall_Protection/Fall_Protection/Miller_Turbo_T-BAK.aspx?site=/americas

Miller Fusion™ Roof Anchor Post- Permanent or Temporary Solutions for Roof Safety! With a variety of models available, the versatile, single-point anchor adapts to a wide range of roof designs including standing seam, membrane, built-up, metal sheathing, concrete and wood. The innovative base plate is designed for quick set-up, not requiring roof penetration to sub-surface rafters or trusses.

http://www.honeywellsafety.com/Products/Miller_Fall_Protection/Fall_Protection/Miller_Fusion.aspx?site=/americas

Capital Safety/DBI-

Exofit NEX Arc Flash Harness- ExoFit NEX™ Arc Flash models incorporate Nomex®/Kevlar® construction featuring flame resistant and non-conductive properties, making them perfect for use in any industry where high voltage electricity or hot-work such as welding is a concern. http://en.capitalsafety.us/Products/USProductCatalog/USHarnessestab/USNEXArcFlashHarnesses/tabid/2785/language/en-US/Default.aspx

DBI-SALA™ Nano-Lok™ Self Retracting Lifeline- At only 1.6 lbs, the SRL’s are virtually unnoticeable to the user when worn and provide the ultimate work site flexibility. The Nano-Lok SRL’s are 15 percent lighter and 30 percent smaller than competing products, making them the most compact and lightweight self retracting lifelines on the market. The lightweight design provides the ultimate comfort and productivity, while still being able to protect workers up to 420 lbs. Available in Single leg and Twin Leg. HOT NEW ITEM

http://en.capitalsafety.us/Products/USProductCatalog/SRLsBlocks/tabid/1670/List/0/CategoryID/28/Level/a/Language/en-US/Default.aspx?txtSearch=CATAdvancedSearch79,467&SortField=DateCreated%20DESC,ProductNumber%20DESC&resultTitle=SRLs%20Blocks%3Cbr%3Eundefined

KC/Jackson-

G60 Level 5 Cut Resistant Gloves with Dyneema® Fiber - http://www.kcprofessional.com/us/product-details.asp?site=kcprofessional_com_us&client=kcprofessional_com_us&proxystylesheet=kcprofessional_com_us&output=xml_no_dtd&q=98235&search=v1&searchtext=98235&btnGo=Go

AIRMAX* Powered Air Purifying Respirator - New Welding PAPR- http://www.kcprofessional.com/us/product-details.asp?site=kcprofessional_com_us&client=kcprofessional_com_us&proxystylesheet=kcprofessional_com_us&output=xml_no_dtd&q=12993&search=v1&searchtext=12993&btnGo=Go

MechanixWear-

M-PACT ORHD- Oil Rigger Glove- You’ve tried the rest….Now try the BEST. http://www.mechanix.com/safety/the-safety-m-pact-orhd

M-PACT EXP-1- High impact job situations require highly visible hands. We’ve covered almost every area of the Mechanix Wear® Safety Specialty M-Pact® EXP-1™ with reflective and hi viz material to make hands easy to locate and identify on the job, with PORON® XRD palm pads for impact protection, a second layer of high abrasion resistance rubberized grip, and a red silicone panel in the primary gripping area. This glove will be the standard in safety hand protection. http://www.mechanix.com/safety/m-pact-exp-1

M-PACT EXP-2- To safeguard often forgotten wrists in high impact situations, we created the Mechanix Wear® Safety Specialty M-Pact® EXP-2™. This glove features an extended and embossed vinyl cuff designed to dull potential impact to the outer wrist. A rubberized top of hand is protected by a 5mm EVA encased TPR shell, highly visible red silicone coverage with anatomically interspersed flex points for excellent dexterity, and a molded flex thumb guard makes this the ultimate in impact hand protection. http://www.mechanix.com/safety/m-pact-exp-2